top of page

Product User Manual

​

Safety and Usage Instructions

  1. Do not use force or heavy objects to manipulate this product.

  2. Keep away from high-temperature environments.

  3. Avoid placing near Wi-Fi routers and other high-frequency transmitting devices to prevent signal interference and sound quality degradation.

  4. For optimal performance, use within 10 meters of the Bluetooth device without physical barriers (e.g., walls).

  5. This product is compatible with any Bluetooth-enabled device.

Getting Started

Power On/Off

  1. Power On: Remove the earbuds from the charging case; they will automatically power on and pair.

  2. Power Off: Place the earbuds back in the charging case and close the lid to power off.

Pairing

  1. Automatic Pairing Mode: After startup, the earbuds enter automatic pairing mode.

  2. Ready to Pair: The earbuds will flash alternating red and white lights.

  3. Connected State: No light flashing and a sound prompt signifies a successful connection.

iPhone Settings

  1. Call Audio Routing: Go to Settings > Accessibility > Touch > Call Audio Routing and select Bluetooth Headset to prevent disconnection during calls.

  2. Audio Accuracy: Improve sound by specifying the device type. Go to Settings > Bluetooth, tap the earphone’s name, then tap Device Type and select Headphone.

Troubleshooting and Functionality

Pairing Troubleshooting

Troubleshooting Steps for Disconnected Earbud:

  1. Remove the device from Bluetooth settings:

  2. Go to your device's Bluetooth settings

  3. Find the audiobites entry

  4. Select "Forget" or "Remove" option

  5. Charge both earbuds:

  6. Place both earbuds in the charging case

  7. Ensure the red light appears, indicating charging

  8. Leave them to charge fully (100%)

  9. Remove earbuds from case:

  10. Once fully charged, take out both left and right earbuds

  11. Wait before pairing:

  12. Do not pair immediately

  13. Allow at least 30 seconds to pass

  14. Pair with your device:

  15. After waiting, pair the audiobites with your device

  16. Both earbuds should now work correctly


If issues persist, contact customer support for further assistance.

Bluetooth Disconnection

  1. Earphones can be disconnected through phone controls.

Customization

  1. Change Bluetooth Name: Find "Audiobites" in Bluetooth settings, click the icon on the right to edit the name.

Music and Calls

  1. Play/Pause Music: Tap either earbud once.

  2. Volume Up: Press the right earbud three times (a prompt will notify maximum volume).

  3. Volume Down: Press the left earbud three times.

  4. Previous Song: Press the left earbud twice.

  5. Next Song: Press the right earbud twice.

  6. Call Siri: Press and hold either earbud for 2 seconds, release after a "drip" sound.

  7. Answer a Call: Tap either earbud.

  8. Hang Up: Tap either earbud during a call.

  9. Reject a Call: Press and hold either earbud for 2 seconds.

Battery and Charging

Battery Notifications

  1. Low Battery Warning: An alarm sounds when the voltage is below 3.2V.

  2. Power-off Voltage: Earphones power off immediately when the battery voltage is below 3.0V.

  3. Charging Finished: Earphones power off automatically after fully charged.

Power Management

  1. Sleep State: Earphones power off automatically after 5 minutes of no connection.

  2. Battery Level Display: Battery level is displayed after a successful connection.

  3. Automatic Reconnection: Earphones automatically reconnect to the phone when powered on.

  4. Charging Box: When charging, the display screen will show the battery percentage and stop flashing once fully charged.

Product Specifications

  1. Bluetooth Version: 5.3

  2. Music Play Time: 3-4 hours

  3. Charging Time: 2 hours

  4. Distance: ≤10 meters

  5. Frequency Range: 20Hz-20KHz

Technical Specifications

  1. Bluetooth Version: V5.3

  2. Paired Name: Audiobites

  3. Bluetooth Profile: HSP, HFP, A2DP, AVRCP, SPP, CVC

  4. RF Carrier Frequency: 2402MHz-2480MHz

  5. Bluetooth Reception Distance: Straight line, obstacle-free <10 meters

Battery Notice

  1. The product contains a rechargeable polymer battery. Charge fully before first use.

Important Notices

  1. Only supports 5V charging. Do not use fast chargers. If charging fails, replace the charger or cable. Use a computer USB port if necessary.

  2. Charge the earphones at least once a month to prevent them from entering low battery protection mode.

  3. If Bluetooth cannot be found, it may be connected to another device. Disconnect the other device or move further away to search again.

  4. The earphones can be easily controlled by pinching the earbuds with two fingers.

Enjoy your Audiobites Earphones!

bottom of page